Export Westar Warper4k

The Warper4k exporter supports export of warping, blending and Black-Level correction for westar Warper4k warp units.

Minimum Firmware Version: 10.2

Export Settings

Export Path

Before the correction data can be uploaded it has to be saved locally to the computer. The export folder should exist. All data necessary for the upload will be saved there.

Warping

Enable “Warping” to export warping information.

Shading

Enable “Shading” to export blending and uniformity correction data.

BLA

Enable “BLA” to export black-level correction data.

Direct upload

Enable to upload the new warping and blending directly to the warp unit.

Upload Slot

Warper4k allows to store multiple corrections on one channel. Select the slot, to store the correction data on. This can be used for later switching on the warp unit.

Device

Enter the device name of each warpbox. When empty, the first warpbox found will be used. The correct names can be retrieved using the manufacturer software Wink or Mesh4k. A unique part of the full name is sufficient for matching.

Channel

Number of channel in warp unit (each warpbox can have up to 5 channel, starts with 1).

Upload

If a warp unit is unchecked it will be excluded from the direct upload.